Dishwasher Repair in Kirkland, WA
Dishwasher repair in Kirkland, WA typically takes 45–90 minutes and costs between $149 and $329, depending on the issue and the brand. FixUFA provides dishwasher diagnostics and repair for homeowners, tenants, and property managers across Kirkland, Bellevue, Redmond, Bothell, Woodinville, and other nearby areas.
We service most major brands, including Bosch, Whirlpool, GE, Samsung, LG, KitchenAid, Frigidaire, Maytag, Amana, and more.
If your dishwasher is leaking, not draining, making noise, or leaving dishes dirty — call or book online to schedule a visit.
Signs You Need Dishwasher Repair
You may need professional service if you notice:
The dishwasher is not draining
Water pooling at the bottom after a cycle
Dishes come out dirty or cloudy
Leaking water from the front or under the unit
The dishwasher makes loud grinding or humming noises
The door won’t latch or close properly
The dishwasher won’t start or stops mid-cycle
Burning smell or unusual heat
Detergent pod not dissolving
Repeated error codes or flashing lights
If any of these symptoms appear, scheduling diagnostics will help prevent further damage to the appliance or surrounding cabinets.
Most Common Dishwasher Problems We Fix
Problem | Likely Cause | What We Usually Do |
|---|---|---|
Error codes | Sensor or control board fault | Read code, test related components |
Microwave shutting off | Overheating or faulty door switch | Replace switch, check cooling system |
Display not lighting | Keypad or control panel issue | Inspect board, replace module/parts |
Buttons not working | Keypad or control panel issue | Test membrane panel, replace keypad/board |
Loud buzzing or humming | Magnetron or transformer problems | Diagnose source, replace faulty component |
Turntable not rotating | Faulty motor or roller guide | Replace motor / adjust turntable support |
Sparks inside the microwave | Damaged waveguide cover or metal contamination | Replace cover, inspect cavity |
Microwave not heating | Magnetron failure, diode or capacitor issues | Test HV components, replace failed parts |
Ice maker not working | Water valve, frozen fill tube, sensor problem | Test valve, thaw line, replace bad parts |
Fridge runs constantly | Dirty coils, door not sealing, thermostat issue | Clean coils, adjust/replace components |
Loud buzzing or grinding noise | Failing fan motor or compressor starting issue | Identify source, replace fan or relay |
Ice buildup on back wall | Defrost failure, door gasket leak | Diagnose, replace heater/sensor/gasket |
Water leaking on the floor | Clogged drain line, cracked hose | Clean/flush drain, replace hoses/fittings |
Warm freezer, melting ice cream | Defrost system problem, heater or sensor failure | Check heater, sensor, control board |
Freezer cold, fridge warm | Evaporator fan issue, airflow blockage | Test fan, clear ice, replace failed parts |
Fridge not cooling | Fan failure, dirty coils, sealed system issues | Diagnose, clean coils, replace fan or part |
Why Dishwasher Issues Are Common in Kirkland
Dishwasher problems in Kirkland often relate to local conditions:
Homes in neighborhoods like Juanita, Totem Lake, Kingsgate, and Rose Hill often have harder water, which affects spray arms, heating elements, and filters.
In newer remodels and townhomes, dishwashers are sometimes installed with minimal clearance, which can affect drainage or cause leaks.
Many Kirkland homes use Bosch, KitchenAid, and Samsung dishwashers — each of which has well-known patterns of typical failures (drain pump issues, heating element faults, and control panel problems).
Frequent power fluctuations in some older homes can affect control boards and sensors.
We take all these factors into account during diagnostics to determine the root cause quickly.
How Our Dishwasher Repair Process Works
Contact usCall, text, or book online. Provide the brand, model, and symptoms if possible.
Scheduled visitWe offer flexible appointment times across all areas of Kirkland.
Diagnostics (15–25 minutes)The technician checks water flow, drain system, sensors, pump, inlet valve, heating element, and control panel.
Clear estimate before repairYou receive a firm price based on diagnostics and required parts.
On-the-spot repair whenever possibleMany common dishwasher issues can be fixed during the first visit.
Full testing cycleWe run a wash or rinse cycle to ensure proper draining, heating, and spraying.
30-day return visit policyIf the same issue comes back within 30 days, we’ll visit again at no additional service charge for the same problem.
Dishwasher Repair Cost in Kirkland, WA
Common price ranges:
Service call & diagnostics: from $89
Drain pump replacement: $189–$329
Door gasket replacement: $149–$229
Inlet valve replacement: $179–$259
Heating element repair: $179–$329
Soap dispenser replacement: $149–$259
Control panel repair: varies by model
Final cost depends on the brand, model, and type of malfunction.
Risks of DIY Dishwasher Repair
Some DIY attempts can lead to additional damage. Common risks include:
Water leaks that damage cabinets and floors
Short circuits from improper wiring
Breaking the door latch or gasket
Incorrectly reinstalling hoses and causing hidden leaks
Misdiagnosing the issue and replacing the wrong part
Mold growth from incomplete water removal
Dishwashers rely on a combination of sensors, pumps, and heating elements — proper diagnostics is essential.
Examples of Recent Jobs in Kirkland
Totem Lake — Bosch dishwasher not drainingCause: clogged pump and blocked drain hose.Solution: pump cleaned, hose flushed. Finished in 60 minutes.
Juanita — GE dishwasher leaking from the frontCause: worn-out door gasket.Replaced gasket and tested sealing. 40 minutes.
Houghton — Samsung dishwasher leaving dishes dirtyCause: clogged spray arms.Cleaned spray arms, filter, and tested water pressure. 50 minutes.
Service Areas in Kirkland
FixUFA provides dishwasher repair throughout:
Juanita
Totem Lake
Kingsgate
Houghton
Finn Hill
Rose Hill
Moss Bay / Downtown Kirkland
Nearby areas we also serve:
Bellevue
Redmond
Bothell
Woodinville
Kenmore
Other surrounding King County locations
If your neighborhood is not listed, feel free to reach out — we often travel to nearby areas as well.
Call, text, or book online. Provide your Kirkland address and the dishwasher model if available.
Yes — we regularly work in rental units and shared buildings.
It depends on the model and cost of the repair. Mid-range and high-end units are often worth fixing, while low-cost units may be cheaper to replace.
Yes, we work with all major brands.
Common reasons include a worn door gasket, loose hose, or faulty float switch.
Typical causes include a clogged filter, blocked drain hose, or a bad drain pump.
Most repairs take 45–90 minutes, depending on the issue.